PREVENTIVE MAINTENANCE
TREADMILL
BIKE [ELECTRONIC]
BIKE [ELECTRONIC]
- Remove motor cover & vacuum dust/debris from motor/MCB
- Check all connections & tighten
- Check belts & tension
- Lubricate belt & lift system, where necessary
- Test headphone jack, if applicable
- Test machine for bearing noise & operation
- Note wearing/worn items
BIKE [ELECTRONIC]
BIKE [ELECTRONIC]
BIKE [ELECTRONIC]
- Check & tighten pedals/arms
- Lube seat post/track adjustment
- Clean out all dust/debris
- Tighten chains/belts and check for bearing wear
- Tighten connections
- Test for operation issues
- Note wearing/worn items
ELLIPTICAL
BIKE [ELECTRONIC]
STAIRCLIMBER
- Remove covers & clean out dust/debris
- Check & lube tension belts
- Test headphone jack, lube bushings & lift system, where applicable
- Check & tighten electronic connections
- Test for operation issues
- Note wearing/worn items
STAIRCLIMBER
BIKE [NON-ELECTRONIC]
STAIRCLIMBER
- Lube chains & check cables for wear
- Inspect & clean brake system
- Check resistance system & tighten electrical connections
- Check & lube pivot points
- Clean out all dust/debris
- Test for operation issues
BIKE [NON-ELECTRONIC]
BIKE [NON-ELECTRONIC]
BIKE [NON-ELECTRONIC]
- Clean bike, check & tighten pedals/crank arms
- Clean & lube tension chain
- Tighten all hardware & lube seat post
- Check & adjust brake mechanism
- Test for operation issues
SIMPLE STRENGTH
BIKE [NON-ELECTRONIC]
BIKE [NON-ELECTRONIC]
- Tighten all hardware & lube pivot points and slides with light oil (Break Free)
- Check for operation issues
SELECTORIZED STRENGTH
MULTI-STATION STRENGTH
MULTI-STATION STRENGTH
- Tighten all hardware, lube pivot points & guide rods with light oil (Break Free)
- Check cables/belts for visible wear
- Tighten cables/belts & test
- Check pads & advise customer of wearing or worn pads
MULTI-STATION STRENGTH
MULTI-STATION STRENGTH
MULTI-STATION STRENGTH
- Tighten all hardware, lube pivots points & guide rods with light oil (Break Free)
- Check cables/belts for visible wear
- Tighten cables/belts and test
- Check pads & advise customer of wearing or worn pads
HYDROMASSAGE BEDS
Full Preventive Maintenance
· Drain old water
· Scrub interior
· Fill with clean, distilled water
· Check & replace cable, belt, barrier & retaining ring (based on manufacturers recommendations)
· Test all functions
· Inspect all components
Bed Repairs
· Replace motors
· Repair cracks
· Replace worn parts
· Trouble shoot software issues
· Provide any service needs including leaks, mechanical & electrical issues
Hydro Installations
· We install all makes and models that HydroMassage sells
Copyright © 2022 Fitness Physicians - All Rights Reserved.
Powered by GoDaddy